The double-station bottle blowing machine is equipped with safety protection devices to ensure the safety of operators and maintenance personnel, including safety door, safety fuse, safety cover, etc. At any time, as soon as the machine is started, the safety protection device must first be properly attached and ensure normal operation. During operation, if any accident or error occurs, first press the emergency stop button, then turn off the main power switch, and then check the cause of the machine failure in time, and then restart it only after confirming that the equipment failure is completely eliminated. The safety protection function of this machine is as follows.

l Before repairing the double-station bottle blowing machine, be sure to turn off the main power switch, and place the 'No Power On' card at a prominent position near the main switch. l Regularly check the safety protection device. If you find that the safety protection device is unstable or does not move, it must be repaired in time. l After repairing, please check whether the tool is in the right position. Do not put it on the machine. l

Please choose suitable hydraulic oil. Before using the machine, fill the oil above the designated scale. l The power supply voltage must be controlled within 10% of the voltage indicated on the equipment nameplate. l The frequency requirement should be controlled within 10% of the frequency indicated on the nameplate. l The normal working temperature of electrical equipment is between 5 ℃ and 40 ℃. l The relative humidity of electrical equipment should be within 50% RH when the maximum ambient temperature is 40 ° C. If the ambient temperature is lower, higher relative humidity can be allowed, such as 90% RH at 20 ° C. l All spare parts together with the machine are designed and manufactured for the machine. Never use it for other purposes, and keep it properly to avoid rust, scratches, and aging.

The current safety door is not closed properly, and no action can be performed; the operation of the front safety door and safety protection device needs to be checked regularly. This machine has perfect alarm information. When an alarm occurs, please refer to this information for appropriate processing. The control voltage on the extruder and automatic operation can only be turned on by the key switch. Unauthorized personnel cannot use these keys. 

Megosztás a facebookon